 |
 |
 |
| 28021 Coker-Vail Rd * Holden, LA 70744 * Phone: (225)567-2700 * Fax: (225)567-3089 |
| * Extended Bases Cast in Required Thicknesses * Riser Sections in 1’, 2’, 3’, and 4’ Sections * Concrete Flat Tops with Specified Aluminum Accesss Hatches * Flexible rubber connectors available in most sizes to accommodate pipe penetration *Coatings available upon request *Water-proofing admixtures available upon request |
|
|
|
|
|
| STANDARD SIZES AVAILABLE: |
| Wet Well The sewage to be transferred is retained in a containment vault commonly referred to as a wet well. In a standard submersible application the submersible pumps and associated items are all housed in the wet well. Valve Box A separate vault located near the wet well that commonly holds the check and isolation shut off valves for the discharge piping. |
| Application: |
| Specifications: |
| Class 1 concrete with design strength of 4500 PSI at 28 days. |
| CONCRETE: |
| REINFORCEMENT: |
| Conforms to ASTM C478 – “Standard Specification for Precast Reinforced Concrete Manhole Sections” |
| CASTINGS: |
| Cast iron manhole ring and cover shall be nominal 24”-inch and shall be traffic duty. |
|
Sizes Indicated are Inside Measurements 48” Diameter 60" Diameter 72" Diameter 96" Diameter |
 |
| Options Available: |
 |
| Click to Enlarge |
 |
| Left: This 96" Wet Well was manufactured with Xypex waterproofing admixture and two-part Coal-Tar Epoxy coated by Gainey's per specifications. |
| Recent Project: |